Cleaned suction strainer. Discharge pressure back to normal after restart.
Facilities
Pumps and compressors, controlled by Amplified
Runtime, motor current, suction and discharge pressure, and remote control on compressors and transfer pumps on the same platform as the wells they serve.
Your equipment, on screen
Monitor your full compression system.
See short runtime bursts line up with motor current. Track suction and discharge pressure alongside them to understand how your pump is operating.
Transfer pump dashboardRuntime, suction pressure, discharge pressure, and motor current.
Interactive preview · Sample dataEquipment protectionWatch the pressure.
Watch the pressure.
Act before damage happens.
Measure suction and discharge pressure continuously. Configure high and low thresholds and automatically shut down supported equipment when pressure crosses a configured limit.
Pressure crosses thresholdProtective shutdown
Explore alerts & automatic shutdowns What you get
Every run measured. Every pump connected.
Runtime you didn't have to go and check
Measure each short run, see when equipment is running or stopped, and track accumulated runtime across pumps and compressors.
Motor current
A split-core current transformer clamps around the motor lead. Draw over time is the cheapest early indication that rotating equipment is working harder than it was.
Remote control and PID setpoints
Start and stop supported equipment remotely. Set PID targets for VFD-enabled pumps through supported controller integrations.
Automatic transfer to SWD
Configure transfer pumps to turn on as tanks approach a fill threshold, moving fluid to SWD systems through connected tank monitoring and pump controls.
Pressure protection and automatic shutdown
Monitor suction and discharge pressure. Configure high and low thresholds to trigger alerts and automatically shut down supported equipment.
Explore alerts and shutdownsEvery cycle countsShort runs.
Short runs.
The complete picture.
Pumps and compressors can run in short bursts. We measure motor current to see when equipment is running and add up each run to track runtime.
Motor current0.0 A
Accumulated runtime0.0 min
Time elapsed00 / 60 min
60 min
High level starts the transfer. Low-low level stops it.When the tank reaches its low-low threshold, we automatically shut off the pump to prevent running dry. It stays off while the tank refills.
Illustrative cycle · Example thresholds: 85% start / 20% low-low stop · Six short runs add up to 12 minutes of runtime.
For VFD-enabled pumps, you can also set PID targets remotely through supported controls.
Compressors & transfer pumps
Ready to monitor your pumps and compressors?
Tell us about your sites and we'll walk you through what a rollout looks like: pricing, install, and what the data gives you on day one.
Join the revolution
Eliminate spills, boost your profits and reduce failures with AI built for the oilfield. Let’s talk about what your operation needs.
Explore more facilities
Tanks
Level, fillage, and temperature on every tank, reconciled against the gauge sheet and turned into daily production.
Injection & SWD
Measure saltwater injection pressure, daily volumes, and cumulative totals at high resolution. Automatically shut down connected producing assets when pressure or volume limits are reached.
Cameras
Solar-powered cameras, installed in 10 minutes. Get a clear view of your lease, catch spills, and see who is taking your oil.
Flow meter
Measure liquid and gas flow rates using your existing meters. Connect NuFlo II turbine meters and ABB Totalflow and µFLO flow computers to bring rates, volumes, and gas data into Amplified.